2007 Arctic Cat Four-Stroke Factory Service Manual, Page 160Get this manual
7Remove the six torx-head screws securing the seat support assembly to the tunnel; then slide the support back out of the way
! CAUTION
The gasoline supply hose may be under pressurePlace an absorbent towel around the connection to absorb gasoline; then remove the hose slowly to release the pressure
! NOTE: After the gas tank vent hose has been removed, it is advisable to plug the hose outlet of the gas tank to avoid gas leakage
10Remove the two torx-head cap screws securing the air silencer to the chassis; then loosen the screws on the clamps securing intake boot to the throttle bodiesZJ010A