2007 Arctic Cat Four-Stroke Factory Service Manual, Page 114Get this manual
16Install the gas tank to its porper position; then secure the tank with the seat support assembly and install the six torx-head cap screwsTighten securely
19With the harness connected, install the air pressure sensor to the bracket on the right-side upper frame; then install the MAP sensor onto the leftside upper frame
! CAUTION
Assure that the wiring harness is properly routed and the cable ties are properly located as noted during disassembling
20Install the four cap screws securing the steering support plate to the steering support (B); then install the four cap screws securing the upper bearing bracket to the upper support plate (A)