2007 Arctic Cat Four-Stroke Factory Service Manual, Page 113Get this manual
14Connect the air temperature sensor harness plug-in to the sensor on the air silencer; then with the screws of the flange clamps directed properly as noted during removing, install the air silencer to the chassis with the two torx-head cap screws (do not tighten at this time)At this point, secure the flange clamps to the throttle body ZJ018A
12Connect the harness plug-ins to the ignition coils (A) and camshaft sensor (B); then route the main harness to the proper connector locations and secure with cable ties as noted during removingZJ015A
! CAUTION