2007 Arctic Cat Four-Stroke Factory Service Manual, Page 110Get this manual
26Install the cable adjuster to the cable bracket, adjust the cable, and tighten the jam nuts securely27With the grafoil gasket positioned in the muffler, install the muffler into the support brackets and to the exhaust manifold28Using Exhaust Spring Pliers (pn 0644-391) or (pn 0644-397), install the two springs securing the muffler to the support brackets; then install the two springs to the exhaust manifold 30Connect the main harness connectors in the chassis
31Install the fuse block making certain the tabs are locked in place32If the hood was removed for this procedure, place the hood into position on the front mounts; then install the two pivot cap screws and attach the hood cable with the hairpin clipAO180