2007 Arctic Cat Four-Stroke Factory Service Manual, Page 100Get this manual
23Install the 10 mm, mm, and mm cap screws into the proper locations in the crankcase; then with the torque pattern shown as numbered on the case, tighten the cap screws only until snug ZJ042A
741-582A
24For initial tightening of the engine case cap screws, use this sequence: ACap screws 1-6 to 1.8 kg-m (13 ft-lb)BCap screws 7-24 to 1.4 kg-m (10 ft-lb)ZJ042B