2007 Arctic Cat Four-Stroke Factory Service Manual, Page 94Get this manual
57Install the grooved belt over the crankshaft pulley, water pump, and alternatorUsing prying tool, wedge the alternator out to obtain belt deflection of 8-9 mm (0.31-0.35 in for new belt or 12-15 mm (0.47-0.59 in for used beltWhile holding the alternator in this position, tighten the pivot cap screw to specifications and the adjustment cap screw to specifications AO269
! NOTE: small amount of Anti-Seize Thread Compound (pn 0678-146) applied to the threads of the sensor will aid in future removal
60Install the exhaust heat shield and four cap screws; then tighten the cap screws to specificationsMD1666