2007 Arctic Cat Four-Stroke Factory Service Manual, Page 78Get this manual

2007 Arctic Cat Four-Stroke Factory Service Manual, Page 78

9Secure the crankcase side cover to the crankcase with the cap screwsTighten to specifications10Install the dowel pins and new gasket; then secure the head to the cylinder with the cap screwsTighten to specifications GM216D

! NOTE: Make sure the timing marks are aligned

11Apply lightweight oil to the ends of the push rods; then install the rods

7Install the washer onto the camshaft

Back to 2007 Arctic Cat Four-Stroke Factory Service Manual