2007 Arctic Cat Four-Stroke Factory Service Manual, Page 76Get this manual
Balancer Shaft Bearing Selection Crankcase Mark A Green pn 3007-135 Black pn 3007-136
Balancer Mark
B Black pn 3007-136 Brown pn 3007-137
! NOTE: Always install green-marked thrust bearing on mag-side; then use proper bearing from the following chart on the PTO-side of the main bearing journal to obtain clearanceThrust Bearing Selection Feeler Gauge Reading
2.560-2.585 mm (0.100-0.102 in 2.535-2.560 mm (0.099-0.100 in 2.510-2.535 mm (0.098-0.099 in 2.485-2.510 mm (0.097-0.098 in 2.460-2.485 mm (0.096-0.097 in 2.430-2.460 mm (0.095-0.096 in
White Yellow Green Blue Black Red
To select the correct rod bearing insert, read the number stamped on the crankshaft counterweight; then read the number stamped on the connecting rod capRefer to the following chart to select the correct bearingConnecting Rod Bearing Selection Rod
1 Green pn 3007-109 Black pn 3007-110