2007 Arctic Cat Four-Stroke Factory Service Manual, Page 41Get this manual
22Remove the two remaining hoses from the separator tank; then remove the two cap screws and lock nuts securing the coolantseparator tank assemblyRemove the tank assembly from the chassis 25Loosen the clamps securing the throttle body assembly to the intake flanges; then remove the assembly and allow it to lie on the tunnelRemove the positive cable from the starter motor
23Remove the two cap screws (A) securing the close-off cover to the front end; then move the steering post assembly to the right side of the engine compartmentRemove the cover and account for the exhaust pipe mounting tab (B) from the right-side cap screw
! NOTE: It is advisable to close off the intake ports of the cylinder head to avoid any foreign objects or components from falling into the engine