1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 475Get this manual
TRACK AND REAR SUSPENSION
You need hand grinder, safety glasses and universal track clip installer to remove and install new cleats (Figure 51)WARNING Wear safety glasses when using hand grinder to remove cleats
1Using hand grinder (Figure 52), grind slit in the corner of the cleat (Figure 53)2Pry the cleat off the track (Figure 54)3Align the new cleat onto the trackInstall the cleat with the cleat installation tool (Figure 55)Check the cleat to make sure it is tight
Table TIGHTENING TORQUES
ftlbEnd caps Front arm mounting bracket to slide rail Front shock absorber to slide rail Idler wheel Offset pivot arm pinch bolts Rail supports (front) Rear arm to slide rail Skid frame mounting screws Spring slide blocks to slide rail Track adjuster to slide rail Wear strips