1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 413Get this manual
FRONT SUSPENSION AND STEERING
aClean all the old grease from the pivot bolt, bushing and washersbWhen installing the skis, refer to the alignment marks made before removalSkis should be reinstalled on the same side as originally installedcCoat the nonthreaded part of the pivot bolt and bushing with low-temperature grease before installationdHold the ski in place, then position the spindle, bushings and rubber damper
eInsert the pivot bolt through the ski and spindle with the bolt head toward the outsidefCoat the threads of the installed ski pivot bolt with Loctite 271 (red)Install and tighten the nut to the torque specified in