1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 398Get this manual
CHAPTER FOURTEEN
2Loosen the brake cable flange nut (A, Figure 31)Detach the cable from the bracket3Detach the brake return spring (B, Figure 31)4Disconnect the brake cable from the caliper5Remove the two bolts (B, Figure 32) attaching the brake bracket to the dropcaseDo not lose the spacers6Remove the caliper assembly from the bracketDo not lose the spacers7Remove the brake pad and pad spring (6 and 7, Figure 33) from the movable half (14, Figure 33)NOTE Do not remove the stationary brake pad from the caliper half (5, Figure 33) unless the pad requires replacement
RemovalDisassembly (1995 and Later Models)