1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 362Get this manual
352 aPosition the roller pin and washer in retainer bracketThe washer must be on outer side of the rollerbSecure the pin in place with taper-head screw2To install roller assembly on 1998 models, proceed as follows: aPosition the roller, pin and washer in retainer bracketThe washer must be on outer side of rollerbSecure the pin in place with roll pinDrive in the roll pin until it is flush with surface of the retainer bracket3Install the sheave covers if they were removedCoat the threads of the attaching screws with Loctite 242 (blue) before installing4Place the fixed sheave on the workbench so the belt surface faces down5Position the torque bracket on the fixed sheave with the previously affixed marks on the two parts alignedNOTE If marks are not present, align the degree mark on the torque bracket with the part number on the fixed sheave
CHAPTER THIRTEEN