1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 352Get this manual
CHAPTER THIRTEEN
button are aligned vertically as shown in Figure 48If the buttons are not correctly installed, the spider will bind
dInsert the last washer between the roller and the spider (Figure 47) and push the pin into the anns of the spiderThe pin must be centered in the spidereRepeat substeps 2a-2d and install the other roller assembliesNOTE The spider must move easily between the arms of the sliding pulley without playIf the buttons have alignment marks, install so the two dots on the face of the
fInsert the six guide buttons in the bores at the ends of the roller pinThe buttons should fit tightly and should not be deformed