1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 300Get this manual
290 aPosition the starter in the bracketInstall the rubber bumper between the starter motor and the crankcasebTighten the locknuts to 17-21 N.m (12-15 ftlb torquecAttach the positive cable to the starter before attaching the ground cable to the batterydInstall tie wrap around the starter to hold the positive cable against the starter motor
CHAPTER NINE
Disassembly
Refer to Figure 45 for this procedure1Hold the starter pinion (17, Figure 45) with suitable wrench and remove nut (20, Figure