1990-1998 Arctic Cat Snowmobiles Repair Manual, Page 208Get this manual
198 13Install the ignition stator plate and flywheel as described in Chapter Nine14Install the oil injection pump and coolant pump as described in this chapter15Install the engine mount plate or brackets and tighten the retaining screws to the torque listed in Table 1016Install the engine in the frame as described in this chapter17If new components were installed, the engine must be broken in as if it were newRefer to Break-In Procedure in Chapter Three
CHAPTER FIVE
DRIVESHAFT FOR COOLANT PUMP AND OIL INJECTION PUMP