2008 Yamaha WaveRunner FX SHO / FX Cruiser SHO Service Manual, Page 370Get this manual
HULL HOOD
QSTS grip and converter
QSTS cable installation
1Install: QSTS cable ends
NOTE: Be sure to fit the QSTS cable end with yellow paint mark into the STBD hole of the pulley Be careful not to twist the QSTS cables2Install: QSTS rod NOTE: Face the hole in the joint of the QSTS rod in the direction shown
QSTS rod set length b: 176 0.5 mm (6.93 0.02 in) QSTS rod locknut: Nm (0.4 kgfm, 3.0 ftlb) LOCTITE 572