2008 Yamaha WaveRunner FX SHO / FX Cruiser SHO Service Manual, Page 366Get this manual
HULL HOOD
Handlebar 4Install: Throttle cable
Installation steps: 1Install the throttle cable end into the throttle lever2Fit the seal into the groove in the bracket3Pull the throttle cable in the direction of the arrow shown, and then fit the end of the seal around the inner cable4Adjust the throttle lever free playRefer to "Throttle lever free play check and adjustment" in Chapter 3Throttle lever free play a: 2.05.0 mm (0.080.20 in)