2008 Yamaha WaveRunner FX SHO / FX Cruiser SHO Service Manual, Page 146Get this manual
Engine unit
E 16Tighten the pipe clamp to the specified torquePipe clamp: Nm (0.2 kgfm, 1.5 ftlb)C E
17Install the stay B, and then tighten the stay bolts to the specified torqueStay bolt: 1st: 23 Nm (2.3 kgfm, 17.0 ftlb) 2nd: 42 Nm (4.2 kgfm, 31.0 ftlb) LOCTITE 242
18Connect the cooling water hoses to the hose joint E19Connect the cooling water hose to the hose joint G20Clamp the hose joint with the plastic tie I