2008 Yamaha WaveRunner FX SHO / FX Cruiser SHO Service Manual, Page 48Get this manual
GEN INFO
Technical tips
Cruise assist control The cruise assist has been added as new functionThe cruise assist is function for maintaining set engine speed while cruisingActivation of the cruise assist will be confirmed by the beeper and the digital speedometer displayThe cruise assist can only be set between engine speeds of approximately 3,000 rmin and approximately 7,000 rminThe cruise assist cannot be activated in the L-MODETo activate the cruise assist: (1) Operate the throttle lever until the desired engine speed is reached(2) Once the engine speed reaches the desired cruise assist setting, push the "SET" switchWhen the cruise assist is activated, the beeper sounds times quickly and the digital speedometer display starts flashingTo keep the cruise assist activated, be sure to keep the throttle lever squeezed further than the position at which the cruise assist was setOnce the cruise assist is activated, the engine speed can be increased by pushing the up switch or decreased by pushing the down switchEach time switch is pushed, the beeper will sound time quickly and the engine speed will changeHowever, the adjustment is limited to maximum of five increments above or below the initial cruise assist settingTo deactivate the cruise assist: Relax your grip on the throttle leverThe beeper sounds times quickly and the digital speedometer display stops flashing when the cruise assist is deactivatedThe cruise assist is also deactivated when the engine is stopped