2003-2004 GP1300R WaveRunner Service Manual, Page 45Get this manual
INSP ADJ
CONTROL SYSTEM
E QSTS cable inspection and adjustment 1Measure: Jet thrust nozzle set lengths and Out of specification AdjustMeasurement steps: Set the control grip to the neutral position Set the jet thrust nozzle in the center position Measure jet thrust nozzle set lengths and If lengths and are not even, adjust the cable joint
2Adjust: QSTS cable Adjustment steps: Set the control grip to the neutral position Loosen the locknut Remove the nut and pivot pin Set the jet thrust nozzle in the center position Turn the cable joint in or out to adjust lengths and bTurn in Turn out Length is increasedLength is increased