1998-2004 Yamaha WaveRunner XL700 XL760 XL1200 Factory Service Manual, Page 33Get this manual
IANOSJP '' CONTROL SYSTEM
PERIODIC SERVICE
CONTROL SYSTEM Pivot shaft bearing inspection 1Inspect: Pivot shaft bearing Excessive play Replace bushingRefer to the "STEERING SYSTEM" in chapter 8Inspection steps: Move the handlebar up and down Move the handlebar back and forthNOTE:-Check that the pivot shaft support bolt G) is secured first If the pivot shaft becomes loose, retighten the clamp until satisfactory feed is obtained
Steering cable inspection and adjustment 1Inspect: Jet nozzle clearanceInspection steps: Turn the handlebar lock to lock Measure the clearances and If the and clearances are not even, adjust the clearances2Adjust: Cable joint (handle side) G)