1994-1995 Yamaha FX700 (FX1) Service Manual, Page 44Get this manual
_IANOSJP _
_ ELECTRICAL SYSTEM INSPECTION
Filling steps: Remove each filler cap using pliers_ Fill with distilled water using jug
Use an acid jug or bottle with mm (0.2 in) or smaller dia nozzleIf the acid jug has too large of nozzle diameter, use tapered tip funnel, during filling, do not cover the filler opening completely; leave room for escaping air and gases After the acid is filled up to the UPPER LEVEL, allow the cell to stand for 20 minutesIf the acid level has dropped, add the same acid up to the UPPER LEVEL once again Acid filling nozzle Q) Filler opening 3Inspect: Battery fluid specific gravity Out of