Bombardier SeaDoo 2007 factory shop manual, Page 348Get this manual
Section 09 HULUBODY Subsection 01 (ADJUSTMENT AND REPAIR)
Using SupertaniumTM drill bit (PIN 529 031 800), drill both rivets holding glove box body
RXP Models Place shift lever in forward positionRemove seatPull dart outSee illustration
Slide glove box cover to open it, and drill the rivet: on each side of glove box7 Pul darr out
Carefully pull the side molded part to release the glove boxPulling too much might lead to damaging the part