Bombardier SeaDoo 2007 factory shop manual, Page 162Get this manual
Section 03 ENGINE Subsection (CYLINDER BLOCK)
PlSTONCON NECTING ROD
Removal
Disassemble cylinder block as per procedure in this sectionRefer to CYLlNDER BLOCKNOTE: It is recommended measure connecting rod big end axial play prior remove connecting rodRefer- to INSPECTION belowRemove connecting rod cap screws
2Piston pin
3Ctrcltp
Detach piston noI0 from connecting rod
Inspection
Connecting Rod Big End Axial Play Using feeler gauge, measure distance between butting face of connecting rod and crankshaft counterweightIf the distance exceeds specified tolerance, replace the worn part
7 Connecting rod screws
NOTE: Before removing the connecting rod caps, mark them to remember the right position when