Bombardier SeaDoo 2007 factory shop manual, Page 30Get this manual
Section 01 MAINTENANCE Subsection 04 (SPECIAL PROCEDURES)
SPECIAL PROCEDURES
SERVICE TOOLS
Description
Part Number
large hose pincher 529 032 500 .9 pump 529 035 880 0
TOWING THE WATERCRAFT IN WATER
Spectal precautions should be taken when towing Sea-Doo watercraft in waterMaximum recommended towing speed is 24 kmlh (15 MPH)When towing your watercraft in wa ter, pinch the water supply hose from the let purrp housing to the engine with large hose pincher 5001
s will prevent the exhaust cooling system from ng which may lead to water being injected inand flling the exhaust system and the enginethout the engine running there isn'tany exhaust pressure 10 carry the water out the exhaust outlet,
CAUTION: Failure to do this may result in damage to the engineIf you must stranded watercraft in water and do not have hose pincher be sure to stay well the maximum towing speed of 24 kmlh (15 MPH)Snugly install the hose pincher on the water supply hose as shown in the following illustrationsNOTE: Pinch the hose with the red tape (if so equipped)