Bombardier SeaDoo 2001 factory shop manual, Page 511Get this manual
Subsection 02
Section 14 HULLBODY (ADJUSTMENT AND REPAIR)
Materials
fiberglass mat fiberglass cloth polyester resin cardboard masking tape sandpaper (100-grit, 220-grit, 320-grit, 400-grit, 600-grit, 1000-grit) 24-grit sanding disks gelcoat putty liquid gelcoat acetone cabosil epoxy filler medium compound (white) fine compound (white) wax
Apply epoxy glue on aluminum insert (PN 292 000 075) knurled surface and on plastic insert inner boreCAUTION: If you notice any clearance between plastic insert and aluminum insert, fill gap with epoxy glue to obtain good adhesion of aluminum insertF01L2VA