Bombardier SeaDoo 2001 factory shop manual, Page 504Get this manual
Section 14 HULLBODY Subsection 02 (ADJUSTMENT AND REPAIR)
DRAIN PLUG INSTALLATION
Refer to the following illustration to install drain plug no15
Loosen gear clamp of outer boot; then, pull outer boot downwardF08L12A F00L2RA
1Loosen gear clamp
1Drain plug 2Silicone sealant (PN 293 800 086) around the middle hole and in the screw holes 3Torque screws to 1.5 Nm (13 lbfin)