Bombardier SeaDoo 2001 factory shop manual, Page 466Get this manual
Section 12 STEERING SYSTEM Subsection 02 (STEERING SYSTEM)
Unscrew bolts from retaining block no20 to remove steering cable from cable support no19
F08K0MA
1Apply synthetic grease
F08K0KA
Steering Stem Arm and Support
Position steering stem arm no15 and support no16 onto steering stem no14
1Cable support 2Remove M6 bolts
Disconnect ball joint no21 of steering cable from jet pump nozzleRemove ball joint no21, jam nut no22 and boots no23 and no24Loosen nut no25 and remove half rings no26 and O-ring no27NOTE: To loosen nut, use steering cable tool (PN 295 000 145)Remove steering cable from watercraft