Bombardier SeaDoo 2001 factory shop manual, Page 452Get this manual
Section 11 PROPULSION SYSTEM Subsection 05 (VARIABLE TRIM SYSTEM)
DISASSEMBLY
Remove VTS cover no7 by pressing on tabsINSPECTION
Make sure boot no3 is in good conditionIf it is cracked or teared, replace boot
Inspect threads and splines of worm no9 for wearIf worm replacement is necessary, renew also sliding shaft
F01J1WA
1Press tabs to remove cover
Disconnect wires from motor no8Remove retaining nuts no111
F01J25A
1Inspect threads and splines