Bombardier SeaDoo 2001 factory shop manual, Page 400Get this manual
Section 10 ELECTRICAL SYSTEM Subsection 05 (INSTRUMENTS AND ACCESSORIES)
VTS Control Module (if so equipped)
It receives its current from the batteryIt is protected by its own 7.5 fuse, located on the MPEM moduleResistance Test Disconnect BROWNBLACK wire and BROWN WHITE wire of VTS control moduleConnect test probes of multimeter to BROWN BLACK wire and BROWNWHITE wire of VTS control moduleNOTE: To permit VTS actuation when engine is not running, remove safety lanyard from switch and depress startstop button to activate MPEM timerPush on VTS switch down position until motor stopsRead the resistance on the ohmmeter, it should indicate resistance of 24 ohms 1Push on VTS switch up position until motor stopsRead the resistance on the ohmmeter, it should indicate resistance of 167 ohms 1RESISTANCE () 167 NOZZLE POSITION UP