Bombardier SeaDoo 2001 factory shop manual, Page 394Get this manual
Section 10 ELECTRICAL SYSTEM Subsection 05 (INSTRUMENTS AND ACCESSORIES)
Compass
GTX Series The compass is located in the storage coverRemove the back panel of the storage cover to access the compass
The BLACK wire is the groundThe GRAY wire is the pulse signal from the multipurpose electronic module (MPEM)
Speed Sensor
All Models except GS and GTS The speedometer gives reading through speed sensorSpeed sensor is installed on riding plateIt works with the water flow which turns magnetic paddle wheel that triggers an electronic pick-up that in turn sends speed signal to the speedometerThe paddle wheel is protected by the pick-up housing
F07H02A
1Compass
Remove the compass from the supportActivate the Info CenterChange the direction of the compass and keep it horizontal10)There should be change of direction on the Info CenterNOTE: To check the accuracy of the compass, you can use portable compass and point it in the same directionCompare the given directions, they should be the same