Bombardier SeaDoo 2001 factory shop manual, Page 363Get this manual
Section 10 ELECTRICAL SYSTEM Subsection 02 (IGNITION SYSTEM)
Using multimeter, check the resistance between the two high tension leads with the spark plug caps removedThe resistance should be 12 at 20CNOTE: short circuit will read ohm (or close to) on ohmmeter787 RFI Engines Primary Winding
947 Engines Primary Winding
F08H0EA
1Remove the female spade connector from the primary side of the ignition coil2With the multimeter set on the resistance scale, connect the meter probes to the primary terminal of the coil and the ground3Resistance should be between 0.330.62 ohmF07H0EA
IGNITION COIL 1Primary side 2Secondary side 3Ground wire