Bombardier SeaDoo 2001 factory shop manual, Page 359Get this manual
Section 10 ELECTRICAL SYSTEM Subsection 02 (IGNITION SYSTEM)
You estimate the correction should be set to (advanced) to align flywheel markBack in the chart, look to find (advanced)This gives number 4Enter this number with the programmer You recheck the timing with the timing light and if the mark is aligned, ignition timing is properly setbYou found the flywheel mark advancedYou must retard the ignition timing The programmer gives you the number 3Referring to the chart, number returns correction of (advanced) and this is too much in this case You estimate the correction should be set to (advanced) to align flywheel markBack in the chart, look to find (advanced)This gives number 4Enter this number with the programmer You recheck the timing with the timing light and found that the flywheel mark is still too advancedYou know now that the correction made previously was not enough and you estimate the correction should be set to(retarded) to align flywheel markBack in the chart, look to find(retarded)This gives number 6Enter this number with the programmer You recheck the timing with the timing light and if the mark is aligned, ignition timing is properly setcYou found the flywheel mark retardedYou must advance the ignition timing The programmer gives you the number 4Referring to the chart, number returns correction of (advanced) and this is not enough in this case You estimate the correction should be set to (advanced) to align flywheel markBack in the chart, look to find (advanced)This gives number 3Enter this number with the programmer You recheck the timing with the timing light and if the mark is aligned, the ignition timing is properly set