Bombardier SeaDoo 2001 factory shop manual, Page 323Get this manual
Section 08 FUEL SYSTEM Subsection 04 (CARBURETOR)
Ensure throttle plates are completely closed on both carburetorsLoosen jam nut and turn adjustment nut to eliminate all the slack in the throttle cable between sensor and carburetorTighten jam nut
F02F21A
1Jam nut 2adjustment nut 3Throttle cable
Throttle lever must reach handlebar grip without causing strain to cable or carburetor cable bracket
F02F20A
947 ENGINE 1Throttle cable 2Adjustment nut 3Jam nut
Turn idle adjustment screw clockwise until it comes in contact with stopperRefer to IDLE SPEED SCREW ADJUSTMENT section for the proper adjustmentAdjust oil pump cableRefer to OIL INJECTION PUMPNOTE: It is important to adjust oil pump cable prior to finalize adjustment of throttle cableCAUTION: Improper oil injection pump synchronization with carburetor throttle opening can cause serious engine damageAdjust throttle cable to obtain proper lever position at full throttleTurn adjuster knob as required to obtain proper throttle lever adjustmentF01K08A