Bombardier SeaDoo 2001 factory shop manual, Page 292Get this manual
Section 07 COOLING SYSTEM Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
Pull the valve slightlyUsing pliers, release the clamp which retains the bellows no8Remove valve no7 and bellows no8
For winterization of cooling system, refer to STORAGEGS, GTS and GTI Models When servicing the hull, always rotate watercraft counterclockwise (seen from the rear)Rotating watercraft on the opposite side could allow residual water in tuned pipe to enter the engine and cause damage
F01E21A
Loosen clamp to separate valve from bellows
F01L45C
F01E24A