Bombardier SeaDoo 2001 factory shop manual, Page 289Get this manual
Subsection 02
Section 07 COOLING SYSTEM (CIRCUIT, COMPONENTS AND CARE)
COMPONENTS
To cut or secure non-reusable Oetiker clamps of cooling system hoses, use pliers (PN 295 000 070)
The elbow fitting can be identified by using the number stamped onto the fitting or by measuring its inside diameterRefer to the following illustration and chart
F00E04A
F01B2KA
1Stamped number AOutlet diameter4.6 mm (.181 in) BInlet diameter5.5 mm (.219 in)
1Cutting clamp 2Securing clamp