Bombardier SeaDoo 2001 factory shop manual, Page 259Get this manual
Subsection 03
Section 06 ENGINE MANAGEMENT (DI) (COMPONENT INSPECTION AND ADJUSTMENT)
Spark Plug Installation
Prior to installation make sure that contact surfaces of the cylinder head and spark plug are free of grime1Using wire feeler gauge, set electrode gap according to the following chart2Apply anti-seize lubricant over the spark plug threads to prevent possible seizure3Hand screw spark plug into cylinder headThen, tighten the spark plug clockwise an additional 14 turn with proper socket
CRANKING SYSTEM
See above for startstop switch and the DESS post testingRefer to STARTING SYSTEM section for other tests