Bombardier SeaDoo 2001 factory shop manual, Page 228Get this manual
Section 06 ENGINE MANAGEMENT (DI) Subsection 03 (COMPONENT INSPECTION AND ADJUSTMENT)
NOTE: In the following illustrations, the lower link plate has been removed for clarity purposes onlyIt does not have to be removed to perform the adjustmentLoosen lock nut of idle set screwUnscrew idle set screw so that master throttle plate completely closes in the throttle bodyEnsure screw end clears the lever stopper
F12R1BA
1Measure resistance between pins and 2Turn screw clockwise to increase resistance
Tighten lock nut
WARNING
F12R0YA