Bombardier SeaDoo 2001 factory shop manual, Page 222Get this manual
Section 06 ENGINE MANAGEMENT (DI) Subsection 02 (OVERVIEW)
These performance-reduced modes allow the rider to go back home which would not be possible without this advanced systemRefer to the DIAGNOSTIC PROCEDURES for complete chartIf fault occurs and involves limp home mode operation, the DI system will reduce engine RPM gradually to the proper levelDiagnostic Mode The malfunctions are recorded in the memory of the MPEMThe memory of the MPEM can be checked using the VCK (Vehicle Communication Kit) (PN 529 035 676) to see the fault codesRefer to the DIAGNOSTIC PROCEDURES section
Ignition Coil
Ignition coil induces voltage to high level in the secondary windings to produce spark at the spark plugTwo separate ignition coils receive input from the MPEMEach coil provides high voltage to its corresponding spark plugThis ignition system allows spark plugs to spark independentlyCAUTION: Do not interchange spark plug cablesThe white tape on the ignition coil should match the white tape on the high tension cableBoth coils are located inside the electrical box2 1