Bombardier SeaDoo 2001 factory shop manual, Page 202Get this manual
Section 05 ENGINE MANAGEMENT (RFI) Subsection 04 (COMPONENT INSPECTION)
Check the resistance of the fuel injector circuitsDisconnect the AMP plug connector number on the MPEMUsing multimeter, check resistance value between terminal as followsCONTACT LOCATION Injector no1 Injector no2 18 and 20 19 and 21
Install the safety lanyard cap on the switch to activate the fuel pumpCheck for fuel leakage from the injector nozzleThere should be less than drop of fuel per minute
3 18 19 20 21
F07F16A
1Fuel injectors 2Fuel rail 3Injector nozzles
If not within specification, replace the fuel injector(s)
LEAK TEST (supply and ventilation circuits)