Bombardier SeaDoo 2001 factory shop manual, Page 91Get this manual
Section 04 ENGINE Subsection 04 (MAGNETO SYSTEM)
DISASSEMBLY
717 Engine NOTE: On 717 engine, the magneto system can be disassembled without removing the engine from the watercraft
Using suitable socket, unscrew retaining nut no13 COUNTERCLOCKWISE when facing itNOTE: If socket is found too large to be inserted in puller plate, machine or grind its outside diameter as necessaryMagneto Cover
Remove screws no11 and wire support no12, then withdraw magneto cover no1
Magneto Flywheel and Ring Gear
Magneto flywheel no2 is locked with puller plate (PN 420 876 080), sleeves (PN 290 847 220) and extension handle (PN 295 000 125)1
F01D4BA
TYPICAL 1Extension handle locking crankshaft