Bombardier SeaDoo 2001 factory shop manual, Page 46Get this manual
Section 02 MAINTENANCE Subsection 04 (WATER-FLOODED ENGINE)
DI Models NOTE: Proceeding in this order, no fuel will be injected into the engine and ignition will be cutWhile engine is stopped, fully depress throttle lever and HOLD for crankingCrank engine several times to drain crankcaseNOTE: second beep every second indicates the drowned mode is activeIf water does not completely go out, it may be necessary to remove the air intake silencer then to lean the vehicle so that water can flow out from throttle bodiesF07H0AA
GTX RFI MODELS 1Grounding device
Remove spark plugs and dry them with clean clothA contact cleaner spray can be usedIt may be preferable to replace spark plugsDo NOT install spark plugs on engine yet
All Models Spray BOMBARDIER LUBE lubricant (PN 293 600 016) into spark plug holesCrank engine againReinstall spark plugs and spark plug cables787 RFI Engines Remove the filler plug of the counterbalance shaft on the engine crankcase