Bombardier SeaDoo 2000 factory shop manual volume 2, Page 343Get this manual
Section 14 WIRING DIAGRAMS Subsection 01 (WIRING DIAGRAMS)
Insert 4.8 mm (.189 in) wide screwdriver blade inside the front of the contact cavity1 2
F00H0QA
1Rotate wire back and forth 2Pull wire
POWER WIRE CONTACT NOTE: The wedge lock must be removed to extract power contactOpen the wedge lockPull both locking tabs and remove wedge lock from plug assembly.F00H0ZA
Pry back the retaining tab while gently pulling wire back until contact is removed