Bombardier SeaDoo 2000 factory shop manual volume 2, Page 289Get this manual
Section 10 PROPULSION SYSTEM Subsection 04 (REVERSE SYSTEM)
Spring and Pawl Lock
Make sure spring no8 is properly installedOne end of the spring is hooked in the pawl lock no7 and the other end is retained by the stopper lock nut
ADJUSTMENT
Put shift lever in forward positionPull shift lever approximately 50 mm (2 in) and push it back slowly in forward positionThe pawl lock no7 should be engaged in the anchor no22If not, adjust reverse cableLoosen bolts no18 at reverse cable support no16Turn adjustment nut no23 as required
F07J06A
1Pawl lock 2Spring 3Stopper lock nut