Bombardier SeaDoo 2000 factory shop manual volume 2, Page 180Get this manual
Section 06 COOLING SYSTEM Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
COMPONENTS
To cut or secure non-reusable Oetiker clamps of cooling system hoses, use pliers (PN 295 000 070)
CAUTION: The elbow fittings are calibrated and can not be interchanged with one of different size as severe engine damage could resultThe elbow fitting can be identified by using the number stamped onto the fitting or by measuring its inside diameterRefer to the following illustration and chart
F01B2KA
F00E04A
1Cutting clamp 2Securing clamp
1Stamped number AOutlet diameter4.6 mm (.181 in) BInlet diameter5.5 mm (.219 in)
Fitting Spigot