Bombardier SeaDoo 2000 factory shop manual volume 2, Page 139Get this manual
Subsection 03
Section 05 ENGINE MANAGEMENT (DI) (COMPONENT INSPECTION AND ADJUSTMENT)
NOTE: When liftingremoving airfuel rail, we recommend replacing carbon dams on direct injectors that have been running for 50 hours or more
Installation
For installation, reverse the removal process but pay attention to the followingA thin film of injection oil may be applyed to O-rings of fuel injectors to ease rail installationApply Loctite 243 on rail retaining screws then torque to 25 Nm (18 lbfft)When installing fuel or air hoses fitting to the airfuel rail, use Loctite Krylox (no29-719)
Direct Injector
The direct injectors can be replaced individually by lifting the airfuel railF12R0DA
1Push clip toward injector to release connector