Bombardier SeaDoo 2000 factory shop manual volume 2, Page 83Get this manual
Section 04 ENGINE Subsection 05 (TOP END)
To remove circlip no5, insert pointed tool in piston notch then pry it out and discard
WARNING
Always wear safety glasses when removing piston circlips
Fully thread on puller handle Insert extractor spindle into the piston pin Slide the sleeve and shoulder sleeve onto the spindle Screw in extracting nut with the movable extracting ring towards spindle1 4
F00B0JA
F01D0PA
TYPICAL 1Piston notch
Puller Sleeve Shoulder sleeve Extracting nut