Bombardier SeaDoo 2000 factory shop manual volume 2, Page 46Get this manual
Section 02 MAINTENANCE Subsection 05 (STORAGE)
ANTICORROSION TREATMENT
Wipe off any residual water in the engine compartmentSpray BOMBARDIER LUBE lubricant over all metallic components in engine compartmentLubricate the throttle cable with BOMBARDIER LUBE lubricantThe seat should be partially left opened during storageThis will avoid engine compartment condensation and possible corrosion
Carburetor-Equipped Models Install hose pinchers at the following location:
ADDITIONAL RECOMMENDED PROTECTION
All Models In cool regions (where freezing point may be encountered), cooling system should be emptied with air pressure or filled with water and antifreeze solution (40 water, 60 antifreeze)CAUTION: Remaining water in cooling system will freezeEither antifreeze must be added or water must be expelled with air compressedThis operation requires good technical knowledge of the cooling system pathIf antifreezing is not performed adequately engineexhaust system may freeze and cause severe engine damageAlways use ethylene glycol antifreeze containing corrosion inhibitors specifically recommended for aluminum enginesNOTE: The engine will not have to run during this operationF12E02A