Bombardier SeaDoo 2000 factory shop manual volume 2, Page 45Get this manual
Section 02 MAINTENANCE Subsection 05 (STORAGE)
NOTE: Fuel stabilizer should be added prior engine lubrication to ensure that the carburetors, if so equipped, are protected against varnish deposits
WARNING
Fuel is flammable and explosive under certain conditionsAlways work in well ventilated areaCarburetor-Equipped Models Always turn the fuel valve to OFF position when storing the watercraft
F01I0BA
COOLING SYSTEM FLUSHING AND ENGINE INTERNAL LUBRICATION
All Models Cooling system has to be flushed with fresh water to prevent salt, sand or dirt accumulation which will clog water passagesEngine must be lubricated to prevent corrosion on internal partsFor proper procedure, refer to FLUSHING AND LUBRICATION
1Grease PTO flywheel